ZRZ-1AS-0.6R case for Raspberry Pi Zero/Zero W & ZUMspot V0.6r with attached 1.3″ OLED

Based off the classic look of C4 Lab’s Zebra case, the ZRZ-1AS case allows you to elegantly combine the ZUMspot MMDVM hat and the Raspberry Pi Zero/Zero W into one package.  Room enough to house the ZUMspot with attached 1.3″ OLED.

 


Fits (click on image to enlarge):


Instructions (click on image to enlarge):

ZUMspot AMBE Server Case – fits: Zumspot AMBE Server

Sporting our classic zebra black ice look, the ZR-AMBE Server case is designed to be compact yet durable and will keep your board comfortably snug even when traveling. We use stainless steel hardware and Acrylic to construct our cases and we guarantee you will love it as much as we do.


Fits (click on image to enlarge):


Instructions (click on image to enlarge):


 

ZUMspot Duplex Kit Case – fits: Zumspot Duplex Kit w/1.3″ screen & Raspberry Pi Zero with header

Zumspot Duplex case

The Zumspot Duplex Kit Case allows you to combine the Raspberry pi Zero or Zero W (not included) with the Zumspot Duplex with attached 1.3″ screen (not included) in our classic Black Ice design for full cover protection (not waterproof).

We go the extra mile to make sure everything we make feels solid and looks great. We use stainless steel hardware and acrylic to construct this case and guarantee you will love it as much as we do.


Fits (click on image to enlarge):


Instructions (click on image to enlarge):


 

ZUMspot Dual Band Kit Case – fits: Zumspot Dual band Rpi 1.0 & Raspberry Pi Zero with header

zumspot Dual Band Kit Case

The Dual Band Kit Case allows you to combine the Raspberry pi Zero/ Zero W (not included) with the Zumspot Dual band Rpi rev 1.0 (not included) in our classic Black Ice design for full cover protection
(not waterproof).

We go the extra mile to make sure everything we make feels solid and looks great. We use stainless steel hardware and acrylic to construct this case and guarantee you will love it as much as we do.


Fits (click on image to enlarge):


Instructions (click on image to enlarge):


 

ZRPi-3.5NSX case for Raspberry Pi 4 B, 3 B+, ZUMspot or JUMBOspot (not included), and 3.5″ Enhanced Nextion Screen (included)

The ZRPi-3.5NSX case allows you to elegantly combine the Raspberry Pi (not included), ZUMspot or JumboSPOT (not included), and a 3.5″ Enhanced Nextion Screen*, which is included. We go the extra mile to make sure everything we make feels solid and looks great. We use stainless steel hardware and acrylic to construct this case and guarantee you will love it as much as we do.

***Note: This case does not have a fan and the Pi-4 is known to run hot under use. It is not recommended to run the Pi-4 at full power for extended periods as performance problems can arise at higher temperatures.***

Notes on fit of Pimoroni Fan Shim (not included)

The clearance between the fan shim (not included) and most radio boards is very slim and not all boards will work with the fan shim if there are components or solder points above the fan.

The fan shim has been tested to work with the Zumspot versions 0.4, 0.5, 0.6 and MMDVM Duplex as long as there is no previous solder left over from an OLED screen.

The fan shim does NOT work with the N5BOC Lonestar Board***

For mmdvm and screen support visit: https://www.facebook.com/groups/Nextion/

The Nextion Enhanced  NX4832K035 is a powerful 3.5″ HMI TFT display, with 32MB Flash data storage space, 1024 byte EEPROM, and  8192 byte RAM:

  • supports built-in RTC
  • supports save data to Flash
  • supports GPIO
  • larger flash capacity
  • larger CPU clock

*Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.


Fits (click image to enlarge):


Instructions (click image to enlarge):

ZRPiA-1AS case for Raspberry Pi 3 A+ and ZUMspot with attached 1.3″ OLED

ZRPiA-1AS

Building on C4 Lab’s Classic Zebra case, the ZRPiA-1AS case allows you to elegantly combine the ZUMspot MMDVM hat and the RPi 3 A +  into one package. We go the extra mile to make sure everything we make feels solid and looks great. We use stainless steel hardware and acrylic to construct this case and guarantee you will love it as much as we do.

This case will also fit a JumboSPOT MMDVM with an attached .96″ OLED


Fits (click image to enlarge):


Instructions (click image to enlarge):

ZRPi-1NSB case for Raspberry Pi 3 B+, ZUMspot MMDVM, and 2.4″ Basic Nextion Screen

For Raspberry Pi 3B+,  3B, 2B, and B+ (not included), ZUMspot or JUMBOspot (not included), and 2.4″ Nextion Basic screen (not included).

  • Case can fit a ZUMspot OR JumboSPOT
  • Fits the 2.4″ Nextion Basic screen NX3224T024*
  • Heatsinks and rubber feet included
  • Stainless steel hardware

For mmdvm and screen support visit: https://www.facebook.com/groups/Nextion/

*Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.


Fits (click image to enlarge):


Instructions will work for basic and enhanced screen (click image to enlarge):

 

 

ZRPi-1AS case for Raspberry Pi 3 B+ and ZUMspot with attached 1.3″ OLED

ZRPi-1AS

Building on C4 Lab’s Classic Zebra case, the ZRPi-1AS case allows you to elegantly combine the ZUMspot MMDVM hat and the RPi3 into one package. We go the extra mile to make sure everything we make feels solid and looks great. We use stainless steel hardware and acrylic to construct this case and guarantee you will love it as much as we do.

This case will also fit a JumboSPOT MMDVM with an attached .96″ OLED


Fits (click image to enlarge):


Instructions (click image to enlarge):

ZRZ-1AS case for Raspberry Pi Zero/Zero W & ZUMspot with attached 1.3″ OLED

ZRZ-1AS

Based off the classic look of C4 Lab’s Zebra case, the ZRZ-1AS case allows you to elegantly combine the ZUMspot MMDVM hat and the Raspberry Pi Zero/Zero W into one package.  Room enough to house the ZUMspot with attached 1.3″ OLED.

This case DOES NOT fit the “ZUM Radio Pi Add-On OLED Kit” with attached shim PCB connector. Pi Add-On OLED upgrade kit available here: Zum Pi Zero Screen Adaption Kit


Fits (click on image to enlarge):


Instructions (click on image to enlarge):

ZRBt-1AS case for Zum Radio Bluetooth board & ZUMspot

ZRBt-1AS

Based off the classic look of C4Lab’s Zebra case, the ZRBt-1 case allows you to elegantly combine the ZUMspot MMDVM hat and the Zum Radio Bluetooth board for Android or iOS into one package.

Room for .96″ or 1.3″ OLED attached directly to the board (does not fit the ZUM Radio Pi Add-On 1.3″ OLED Kit)


Fits (click on image to enlarge):


Instructions (click image to enlarge):

ZR-2SK adaption kit for Pi Add On 1.3″ OLED Kit For ZUMspot

ZR-2SK

This is a case adaption kit for adding the ZUM Radio Pi Add-On OLED to your ZUMspot. The case adaption kit will let you upgrade your Zum Pi Zero case to fit the 1.3″ OLED with shim PCB available from HRO.

Adaption kit made of laser cut acrylic in our classic Black Ice design of clear and black layers.

This is different than our Zum Pi Zero Screen case which will house a .96″ OLED and needs to be mounted directly to the board.


Fits (click on image to enlarge):


Instructions (click image to enlarger):

ZRPi-1NSX case for Raspberry Pi 3 B+, ZUMspot MMDVM, and 2.4″ Enhanced Nextion Screen (included)

For Raspberry Pi 3B+,  3B, 2B, and B+ (not included), ZUMspot or JUMBOspot (not included), and 2.4″ Nextion Enhanced screen (included).

  • Case can fit a ZUMspot OR JumboSPOT (not included)
  • Includes a 2.4″ Nextion Enhanced screen*
  • Heatsinks and rubber feet included
  • Stainless steel hardware

Notes on fit of Pimoroni Fan Shim (not included)

The clearance between the fan shim (not included) and most radio boards is very slim and not all boards will work with the fan shim if there are components or solder points above the fan.

The fan shim has been tested to work with the Zumspot versions 0.4, 0.5, 0.6 and MMDVM Duplex as long as there is no previous solder left over from an OLED screen.

The fan shim does NOT work with the N5BOC Lonestar Board***

For mmdvm and screen support visit: https://www.facebook.com/groups/Nextion/

The Nextion Enhanced NX3224K024 is a powerful 2.4″ HMI TFT display, with 16MB Flash data storage space, 1024 byte EEPROM, and 3584 byte RAM:

  • supports built-in RTC
  • supports save data to Flash
  • supports GPIO
  • larger flash capacity
  • larger CPU clock

*Please note that connecting the Nextion screen to your set-up may require additional soldering of pins or wires not covered in these case instructions.


Fits (click image to enlarge):


Instructions (click image to enlarge):