8 Slot Cloudlet Cluster Case – Raspberry Pi 4B, 3 B+, and other single board computers


For Raspberry Pi 4B, 3B+,  3B, 2B, and B+ (not included).

  • Eight bays hold most single-board computers* or 2.5″ hard drives.
      • Other single board computers must adhere to the RPi mounting hole pattern and port configuration.
  • Room for most 8-port switches (maximum size of 4 1/2″ x 8 3/4″ x 1 5/8″)
  • Multiple cloudlets can be bolted together, either vertically or horizontally for modular clusters
  • Made with 1/4″ acrylic for high durability
  • Plates click securely into place for fast removal without bolts.
  • Attention International customers: also available at the Pi Hut-UK



For the Raspberry Pi and other Single Board Computers

The Cloudlet Cluster Case was introduced in 2016. Created to be a versatile case for multiple single board computers, it’s innovative design continues to be the best case for Cluster computing. Each Cloudlet Case is laser cut from extra thick acrylic and then hand bent and assembled. This laborious process ensures a durable and quality case for your Cluster Computing.


Eight Raspberry Pi with Official PoE Hat – It Fits!

The popular combination of the Raspberry Pi and Official PoE Hat or PoE+ Hat (release June 2021) will fit in one slot of space in the Cloudlet Cluster Case.

8 port PoE Switches will fit with an overhang, as seen in this picture.

Cloudlet Case Fans will fit mounted internal or external.

Please note that fans are GPIO powered, if PoE Hat is installed, GPIO pins will be covered by PoE Hat

Other Hats are fully compatible with the case, but may take two slots of space.

Contents of Cloudlet Cluster Case

Main case shell: 9.37” (238 mm) x 5.65” (144mm) x 4.825” (123mm)

2 – Cosmetic color plates**If black or wood option is chosen

10 – mounting plates for SBCs or 2.5″ hard drives

4 – 50*50mm 5V fans GPIO powered

Hardware for attaching SBC such as Raspberry Pi to mounting plates

2 pairs of adhesive backed velcro pads for anchoring switch to case. Rubber Feet for bottom of Case included.

Remove Components Easily
Components are mounted onto acrylic plates.

Plates click securely into place for fast removal without bolts.

Other Features:

  • Holes for zip ties to aid with cable management.
  • Holes in bottom of case allow for pass through of micro usb plugs, and larger holes allow full size AC plug to pass through.
  • Color plates on side of case can be removed or switched out if that option is chosen.

YouTube link to video of Cloudlet Case Assembly

Instructions (click image to enlarge):

Additional information

Weight 48.00 oz
Dimensions 9.37 × 5.65 × 4.825 in
Cloudlet Case Color

Black Lime, Mist, Mist/Black, Smoke, Z-Cosmetic Defects, Clear, Clear/Black, Clear/Wood