8 Slot Cloudlet Cluster Case – Raspberry Pi 4B, 3 B+, and other single board computers ~ Color Options

$59.99

For Raspberry Pi 4B, 3B+,  3B, 2B, and B+ (not included).

  • Eight bays hold most single-board computers* or 2.5″ hard drives
  • Room for most 8-port switches (maximum size of 4 1/2″ x 8 3/4″ x 1 5/8″)
  • Multiple cloudlets can be bolted together, either vertically or horizontally for modular clusters
  • Includes four 50x50mm quiet fans for active airflow
  • Made with 1/4″ acrylic for high durability

*Other single board computers must adhere to the Raspberry Pi mounting hole pattern and port configuration.

  • Black Ice
  • Classic Wood
  • Clear
Clear

Description

We’re proud to announce an innovative cluster case for those building personal cloud clusters, Cloudlet as a Case or CaaC. The CaaC cluster case works with Raspberry Pi 4 B, Raspberry Pi 3 B+, and other single board computers which adhere to the same mounting hole pattern and port configuration (fit not guaranteed). There is a 1/8″ gap between the inside of the case and the edge of the Raspberry Pi board.

Additional information:

  • Plates click securely into place for fast removal without bolts
  • Hats are fully compatible with the case, but may take two ports of space
  • Slots for zip ties to aid with cable management
  • OD= 9.37” (238 mm) x 5.65” (144mm) x 4.825” (123mm)
  • Uses #440 x 5/8″ long stainless steel screws to attach multiple CaaCs together
  • Holes in bottom of case allow for pass through of micro usb plugs, and two larger holes (in bottom of case) allow full size AC plug to pass through
  • Four 50 x 50mm fans are powered by SBCs and provide airflow for all eight ports
  • Color plates on side of case can be removed or switched out
  • Raspberry Pi 4 B Compatible with the following notes on fit:
    • if pi-4 is mounted the same as the pi-3 Ethernet cable will cross over the usb ports. If this works
      for the customer then the case can still fit 8 pi’s.
    • If pi-4 is mounted on the opposite side of plate it make the Ethernet closer to the bottom of the
      case as before. However the power and hdmi ports are facing upwards and the case is limited to 7 pi’s.

Contents:

  • Main case shell
  • 2 – Cosmetic color plates
  • 10 – port plates for SBCs or 2.5″ hard drives
  • 4 – 50*50mm low noise 5V fans
  • Screws for attaching fans to case
  • 4 pairs of adhesive backed velcro pads for anchoring switch to case
  • Stainless steel screws/nuts for attaching to another CaaC

YouTube link to video of Cloudlet Case Assembly


Instructions (click image to enlarge):

Additional information

Weight 31.00 oz
Dimensions 9.37 × 5.65 × 4.825 in
Cloudlet Case Color

Black Ice, Classic Wood, Clear